Aileron Control pushrod, ball end, root hinge,
nuts, anti-trim tab pushrod, ends, pins
inspected, secured
Teflon sealing tape inspected, freedom
of movement up to limit stops
Wing tip Shake - check gaps in pins
Press down/lift, test shock absorber
function
Position light, camera fix point - inspect
Wing surface Top, bottom, leading edge inspected
Pitot tube Inspected
Inspection window Aileron bell crank, pushrods, ball ends,
bolts, nuts inspected
Fuel tank cap Inspected, fuel quantity checked, cap
secured
Window, wing root sealing tape, stickers, walkway
Inspected
Fuel drain Fuel drained, checked for water
Left/right main leg
Tire and wheel Inspected, pressure (3,0 bar/ 44 psi)
Brake system Disc and securing wire, calliper, bolts
Trailing arm Hinges, bolts, nuts, wheel axle, wheel
nut, secure and inspected
Shock absorber Inspected
To Next Page
Loading...
