15
INSTALLING THE PRINT HEADS AND INK TANKS
12
Close the maintenance cover.
13
Close the front cover.
Press both edges of the front cover with both of your hands until it locks.
14
Confirm on the display panel that print heads and ink tanks
have been securely set to the unit.
The unit automatically aligns the print heads, and a test chart will be printed.
15
Align the print heads following the procedure shown in
"ALIGNING THE PRINT HEAD" (See the next page). Start from
step 4 to perform the alignment.
If a message appears, which lets you know that any of print heads or ink tanks
have not been installed in their right positions, go back to the step 1 to repeat the
procedure.
To keep good print head quality, keep all the ink tanks installed to the
corresponding print head.
During ink tank replacement, if the cover is left open for more than 8 minutes, the
carriage will automatically return to its home position.
Cleaning the Print
Head
Printing
...
Alignment Patterns
To Next Page
Loading...
Need help?
General
