47
CHANGING THE PAPER DEFAULT SETTING
Use this function to change the default setting for paper used by the unit. The reduction/
enlargement copy ratio settings will also changed automatically. Refer to "REDUCING/
ENLARGING THE IMAGE SIZE FOR COPYING" for more information on making changes
to these settings. (See page 35) Follow the steps listed below to change the paper default
setting.
1
Press the "MENU" button, and keep pressing the (or )
"ARROW" button until "Paper Default" is shown on the first line
of the display panel.
2
Keep pressing the (or ) "ARROW" button until the desired
value appears on the second line of the display panel.
Select the desired market from "1. 8.5x11"and "2. A4" (Default setting) setting
values.
3
Press the "ENTER" button.
A checkmark ( ) will be added to show the selected setting. After displaying the
selected value for one second, the display will return to the ready message.
CHANGING THE LANGUAGE SETTING
Use this function to change the language shown in the display panel. Follow the steps
shown below to change the language setting.
1
Press the "MENU" button, and keep pressing the (or )
"ARROW" button until "Language" is shown on the first line of
the display panel.
2
Keep pressing the (or ) "ARROW" button until it shows the
desired language setting on the second line of the display
panel.
Select the desired language from "1. American English", "2. English" (Default
setting), "3. Français", "4. Español", "5. Italiano", "6. Deutsch",
"7. Nederlands", and "8. Svenska" setting values.
3
Press the "ENTER" button.
4
Keep pressing the (or ) "ARROW" button to display
"2. Yes" or "1. No" on the second line of the display panel.
7.Paper Default
2.A4
9.Language
2.English
To Next Page
Loading...
Need help?
General
