To Next Page

To Previous Page

AL-1551CS SIMULATION, TROUBLE CODES 10 - 8

30 01 Paper sensor status display

Indicates the paper sensor status using the lamps on the operation panel.

43 01 Fusing temperature setup (Normal copy)

(Operation/Procedure)

1. When this simulation is executed, the currently set code number is displayed.

2. Enter the code number and press the START key, and the setting will be changed.

04 Fusing temperature setup 2

(Operation/Procedure)

1. When this simulation is executed, the currently set code number is displayed.

2. Enter the code number and press the START key, and the setting will be changed.

05 Fusing temperature setup in duplex copy

In duplex copy, this setup value is added to the fusing temperature of single copy. When this simulation is executed, the current setup

of the code number is displayed. Enter the code number and press the PRINT switch to enable the setup.

09 Setup of fusing control of postcard size paper

Main

code

Sub

code

Content

Sensor name Display lamp

Before-resist paper sensor (PPD1) Developer cartridge replacement lamp

Fusing section paper sensor (PPD2) JAM lamp

Paper exit sensor (POD) Photoconductor cartridge replacement lamp

2nd CS paper sensor (PPD3) 2nd cassette lamp

New drum cartridge sensor (PUIS) Zoom lamp

Single manual feed paper sensor (MFD) AE lamp

Code number Set temperature (°C)

0175

1180

2185

3190

4 195 (* Default)

5200

Code number Set temperature (°C)

0155

1160

2165

3 170 (* Default)

4175

5180

Code number Temperature shift (°C)

0±0°C * Default

1 – 8°C

2 – 6°C

3 – 4°C

4 – 2°C

5±0°C

6+2°C

7+4°C

8+6°C

9+8°C

The default for Japan model is “1.”

Code number Setup

0 Cancel * Default

1 Setup

Brand	Sharp
Model	AL-1215
Category	Copier
Language	English

Sharp AL-1215 Service Manual

Table of Contents

Other manuals for Sharp AL-1215

Questions and Answers:

Sharp AL-1215 Specifications

Related product manuals