Sharp AL-2021 Service Manual

AL-2041 USER PROGRAM 11 - 1
[11] USER PROGRAM
The user programs allow the parameters of certain functions to be
set, changed, or cancelled as desired.
1. Setting the user programs
1) Press and hold down the light ( ) key for more than 5 sec-
onds until all the alarm indicators ( , , ) blink and " "
appears in the display.
2) Use the left copy quantity ( ) key to select a user program
number (For the user program numbers, see the following
table.).
The selected number will blink in the left side of the display.
3) Press the start ( ) key. The entered program number will be
steadily lit and the currently selected parameter number for the
program will blink on the right side of the display.
4) Select the desired parameter using the right copy quantity ( )
key.
The entered parameter number will blink on the right of the dis-
play.
* Factory default settings are indicated with an asterisk (*).
5) Press the start ( ) key. The right-hand number in the display
will be steadily lit and the entered value will be stored.
Note: To change the setting or to set another mode, press the
clear key. The unit will return to step 2.
6) Press the light ( ) key to return to the normal copy mode.
Program
No.
Mode Parameters
1 Auto clear time 1 → 10 sec., 2 → 30 sec.,
*3 → 60 sec., 4 → 90 sec.,
5 → 120 sec., 6 → OFF
2 Preheat mode *1 → 30 sec., 2 → 60 sec.,
3 → 5 min., 4 → 30 min.,
5 → 60 min., 6 → 120 min.,
7 → 240 min.
3 Auto power shut- off
mode
*1 → ON, 2 → OFF
4 Auto power shut- off
timer
*1 → 5 min., 2 → 30 min.,
3 → 60 min., 4 → 120 min.,
5 → 240 min.
6 SPF automatic original
discharge time
(AL-2031/2041)
1 → 5 min., *2 → 30 min.,
3 → 60 min., 4 → 120 min.,
5 → 240 min., 6 → OFF
10 Resolution of AUTO &
MANUAL mode
*1 → 300dpi, 2 → 600dpi
13 Memory for printer 1 → 30%, 2
→ 40%,
*3 → 50%, 4 → 60%,
5 → 70%
21 Reset factory 1 → YES, *2 → NO
22 Sort auto select
(AL-2031/2041)
*1 → ON, 2 → OFF
24 Prevention of OC copies
when the original cover/
SPF is up function
*1 → ON, 2 → OFF
25 Copy effective paper
width setting function
(Bypass tray)
*1 → Large
(LETTER/A4 width),
2 → Small
(INVOICE/B5R width)
26 Copy effective paper
width setting function
(Paper tray)
*1 → Large
(LETTER/A4 width),
2 → Small
(INVOICE/B5R width)
28 Selection of copy start
state (Polygon rotation
on/off)
*1 → ON, 2 → OFF
29 Fusing temperature
setting when the bypass
tray is used
1 → Low, *2 → High
32 USB 2.0 mode switching 1 → Full-Speed,
*2 → Hi-Speed

Sharp AL-2021 Specifications

General

Brand	Sharp
Model	AL-2021
Category	All in One Printer
Language	English