Sharp AN-37AG2 - Installing the wall-mount bracket (For Model 37 inch Separate Type)

E-9
ENGLISH
Installing the wall-mount bracket (For Model 37 inch Separate Type)
1
Use the following procedures to install the Model 37 inch LCD color TV (LC-37AD1, LC-37AD2,
LC-37BD5, LC-37HV4, LC-37HV6, LC-37AA1, LC-37GD1, LC-37GD2, LC-37G4, LC-37U5-B/-R,
LC-37L5-B/-T, LC-37W5C/K).
• Be sure to use two people to perform the wall-mount bracket installation work for
the Model 37 inch LCD color TV.
• The installation work must be conducted while the Model 37 inch LCD color TV is
standing upright, so be careful that it does not fall over.
Caution
2
Remove the back terminal covers from the LCD color TV.
Remove the terminal covers while the LCD color TV is standing upright.
Wire in the cables.
Install the top terminal cover.
3
AN-37AG2E 04.8.10, 6:59 PMPage 9 AdobePageMaker6.5J/PPC