Sharp AR-235

SINGLE PASS FEEDER (AR-SP4)/REVERSING SINGLE PASS FEEDER (AR-RP3)
99
6
OPTIONAL EQUIPMENT
4
Set the number of copies and press the START ( ) key.
●
Be sure not to touch the originals as they move on the reversing tray. This may cause
misfeeds.
One-sided copies from two-sided originals
To copy in the two-sided to one-sided copy mode, an RSPF must be installed.
1
Ensure that no original is left on the platen glass. Adjust the original
guides to the size of the originals and set the originals face up in the
document feeder tray.
●
5-1/2" x 8-1/2" size originals cannot be used.
2
Press the 2-SIDED COPY key.
●
The duplex copy mode selection screen will appear.
COPY MODE
1 to 1
1 to 2
2 to 2
1
2
2
2
00EX.book99ページ２００１年５月２５日 金曜日 午前１０時４９分