SINGLE PASS FEEDER (AR-SP4)/REVERSING SINGLE PASS FEEDER (AR-RP3)
100
OPTIONAL EQUIPMENT
3
Use the and keys to select two-sided to one-sided copying.
4
Use the or key to select binding change if desired. Then, press the
OK key.
●
The image of one side can be rotated 180º using the image rotation feature. This feature
can be useful depending on the orientation of the original image and the desired binding
position.
5
Set the number of copies and press the START ( ) key.
●
Press the CLEAR (C) key to stop copying in the middle of a run.
●
Be sure not to touch the originals as they move on the reversing tray. This may cause
misfeeds.
COPY MODE
2
1
2
2
2
1
1 to 2
2 to 2
2 to 1
BINDING CHANGE OFF
00EX.book100ページ２００１年５月２５日 金曜日 午前１０時４９分
To Next Page
Loading...
