FINISHER (AR-FN5)
108
OPTIONAL EQUIPMENT
Using the SPF or the RSPF
1
Set the originals in the document feeder tray.
●
If the number of copies in one set is more than 30, the copies will not be stapled.
●
If the orientation of the originals does not match that of the copy paper, the images of the
originals will be rotated. The stapling position varies with the orientation of the original.
●
When copying B4 (8-1/2" x 14") or A3 (11" x 17") size originals with portrait orientation
images, copies will be stapled at the position shown below.
2
Press the OUTPUT key.
●
The output mode selection screen will appear.
3
Use the and keys to select "STAPLE SORT" and press the OK key.
●
Also the OUTPUT key can be used to select an output mode.
Stapling position
Stapling position
OUTPUT
NO SORT
SORT
STAPLE SORT
EXIT CENTER
3
2
1
CENTRE
00EX.book108ページ２００１年５月２５日 金曜日 午前１０時４９分
To Next Page
Loading...
