SINGLE PASS FEEDER (AR-SP4)/REVERSING SINGLE PASS FEEDER (AR-RP3)
96
OPTIONAL EQUIPMENT
4
Ensure that the one-sided to one-sided copying mode is selected.
●
When no icon indicating a duplex copy mode is displayed, the one-sided to one-sided
copying mode is selected.
5
Set the number of copies and press the START ( ) key.
●
Press the CLEAR (C) key to stop copying in the middle of a run.
Two-sided copies from one-sided originals
●
Paper sizes that can be used in the duplex copy mode are A5, B5, B5R, A4, A4R, B4, and A3 (8-1/2"
x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", and 11" x 17").
1
Ensure that no original is left on the platen glass. Adjust the original
guides to the size of the originals and set the originals face up in the
document feeder tray.
●
If an uneven number of originals are set, the last copy will be one-sided.
Ready to copy.
A4
100%
AUTO
AUTO
A4
00EX.book96ページ２００１年５月２５日 金曜日 午前１０時４９分
To Next Page
Loading...
Need help?
General
