SINGLE PASS FEEDER (AR-SP4)/REVERSING SINGLE PASS FEEDER (AR-RP3)
97
6
OPTIONAL EQUIPMENT
2
Press the 2-SIDED COPY key.
●
The duplex copy mode selection screen will appear.
3
Use the and keys to select one-sided to two-sided copying.
●
Also the 2-SIDED COPY key can be used to select a duplex copy mode.
4
Use the or key to select binding change if desired. Then, press
the OK key.
●
The image of one side can be rotated 180º using the image rotation feature. This feature
can be useful depending on the orientation of the original image and the desired binding
position.
5
Set the number of copies and press the START ( ) key.
●
Press the CLEAR (C) key to stop copying in the middle of a run.
COPY MODE
1 to 1
1 to 2
2 to 2
1
2
2
2
COPY MODE
1 to 1
1 to 2
2 to 2
BINDING CHANGE OFF
1
2
2
2
00EX.book97ページ２００１年５月２５日 金曜日 午前１０時４９分
To Next Page
Loading...
Need help?
General
