: Feb. 6 2004
1
AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 50
Code
Signal
name
Name Function/Operation Type Model Note
AINPD AINPD Duplex (ADU) paper entry
detector
Duplex (ADU) paper entry
detection, detection of paper exit
to finisher
Transmission
type
Paper transport system
sensor
APPD1 APPD1 Duplex (ADU) paper pass
detector 1
Duplex (ADU) upstream paper
pass detection
Transmission
type
Paper transport system
sensor
APPD2 APPD2 Duplex (ADU) paper pass
detector 2
Duplex (ADU) midstream paper
pass detection
Transmission
type
Paper transport system
sensor
DSW-ADU DSW-ADU Duplex (ADU) cover open/close
detector
Duplex (ADU) cover open/close
detection
Transmission
type
Door switch
PFD2 PFD2 Paper pass detector 2
Paper pass detection (Left door
unit) from duplex (ADU)/Paper
feed tray 1, 3, 4
Transmission
type
Paper transport system
sensor
THPS2 THPS2 Transfer belt contact/separation
home position sensor 2
Transfer belt separation home
position detection 2
Transmission
type
Other sensors, switch
ADM1 ADM1 Duplex (ADU) motor 1
Drives the paper exit rollers 2
and the paper transport roller 19.
Stepping motor High speed only
ADM2 ADM2 Duplex (ADU) motor 2 Drives the paper transport roller
20 and 21.
Stepping motor Selection of Normal speed/
High speed
TURM TURM Transfer separation motor Drives and separates the transfer
belt.
DC brush motor The transfer belt is pressed
on the OPC drum only
during printing.
DGS DGS Paper exit gate solenoid Drives the paper exit gate. Electromagnetic
solenoid
DSW-L DSW-L Left door open/close detector Left door open/close detection Micro switch Door switch
No. Name Function
1 Transport roller 21 (Drive) Transports paper from the transport roller 20 to the transport roller 15.
2 Transport roller 20 (Drive) Transports paper from the transport roller 19 to the transport roller 21.
3 Transport roller 19 (Drive) Transports paper from the transport roller 2 to the transport roller 20.
4 Paper exit roller 1 Discharges paper. / Transports paper to the duplex (ADU) section.
1
1
To Next Page
Loading...
