: Feb. 9 2004
1
AR-M550/M620/M700 SIMULATION 8 - 6
2. Outline and purpose
The simulation has the following functions to grasp the machine oper-
ating status, identify the trouble position and causes in an earlier stage,
and make various setups and adjustments speedily for improving the
serviceability of the machine.
1) Various adjustments
2) Setup of specifications and functions
3) Canceling troubles
4) Operation check
5) Various counters check, setup, and clear
6) Machine operating status (operation history) data check, clear
7) Transfer of various data (adjustments, setup, operations, counters)
The operating procedures and the displays differ depending on the
form of the operation panel of the machine.
3. Code-type simulation
A. Operating procedures and operations
∗ Entering the simulation mode
1) Copy mode key ON
→
Program key ON
→
Asterisk (*) key ON
→
CLEAR key ON
→
Asterisk (*) key ON
→
Ready for input of a main
code of simulation
2) Entering a main code with the 10-key
→
START key ON
3) Entering a sub code with the 10-key
→
START key ON
4) Select an item with the scroll key and the item key.
5) The machine enters the mode corresponding to the selected item.
Press START key or EXECUTE key to start the simulation opera-
tion.
To cancel the current simulation mode or to change the main code
and the sub code, press the user setup key.
∗ Canceling the simulation mode to return to the normal mode
1) Press CA key.
66 01 FAX-related soft SW setting check/change ●
02 FAX-related soft SW clear (Excluding FAX adjustment values) ●
03 FAX-related memory check ●
04 Signal send mode (Signal send level: Max.) ●
05 Signal send mode (Signal send level: Soft SW setting) ●
06 Confidential pass code print ●
07 Image memory content output ●
08 Voice message reproduction (Signal send level: Max.) ●
09 Voice message reproduction (Signal send level: Soft SW setting) ●
10 Image memory clear ●
11 300bps signal send (Signal send level: Max.) ●
12 300bps signal send (Signal send level: Soft SW setting) ●
13 Dial number registration ●
14 Dial test (10PPS make time setting & delivery test) ●
15 Dial test (20PPS make time setting & send test) ●
16 Dial test (DTMF signal adjustment & send test) ●
17 DTMF signal send mode (Signal send level: Max.) ●
18 DTMF signal send mode (Signal send level: Soft SW setting) ●
19 Address book backup (WR TO FLASH) ●
20 Address book backup (RD FROM FLASH) ●
21 FAX information print ●
23 FAX program download ●
24 FAST memory data clear ●
25 MODEM dial-in FAX number registration ●
26 MODEM dial-in telephone number registration ●
27 Voice warp transfer destination registration ●
29 Address book clear ●
30 TEL/LIU status change check ●
31 TEL/LIU setting ●
32 Receive data check ●
33 Signal detection check ●
34 Communication time measurement display ●
35 MODEM program rewrite ●
36 MFP controller I/F check ●
39 FAX destination registration ●
60 (Blind) ACR data registration ●
67 02 Centro port check ●
11 Select IN signal setting ●
16 Network card check ●
Main
code
Sub
code
Operation contents
Data save destination/Target
MFP Scanner Engine
To Next Page
Loading...
