Sharp AR-M550N - Dry Heater Switch

AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 159
9) Remove the main power switch.
10) Remove the counter mounting plate.
11) Disconnect the connector and remove the front door open/close
switch unit.
a-4. Left door open/close detector
1) Open the left door.
2) Remove the left front cabinet
3) Disconnect the connector, and remove the left door open/close
detector unit. Remove the left door open/close detector.
a-5. Dry heater switch
1) Remove the rear cabinet.
2) Disconnect the connector, and remove the dry heater switch.