Sharp AR-M550N - Dry Heater; Paper Feed Trays 1 and 2 Sensor

: Feb. 6 2004
1
AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 19
b-3. Paper feed trays 1 and 2 sensor
1) Remove the rear cabinet.
2) Disconnect the connector, and remove the paper feed trays 1 and
2 sensor.
b-4. Dry heater
1) Remove the rear cabinet. (See “b-3. Paper feed trays 1 and 2 sen-
sor” in this section)
2) Disconnect the connector from the dehumidifier heater relay PWB.
4) Remove the dry heater unit.
4) Remove the dry heater.
3) Remove the paper feed tray unit, and remove the dry heater band.
1
1
1