: Feb. 9 2004
1
AR-M550/M620/M700 OTHER 12 - 4
(7) Total counter specifications
The total count viewed from the user and the counter used for charging are “Total output counter (total valid paper counter).”
(8) Blank paper count specification
∗ Large size: A3, 11 x 17. (Greater size than paper length 384mm)
*1: Follows SIM 26-5 (Count-up mode). (Default: Double count-up (Set value: 2))
( ): Large size single count-up setting (Count-up number when set to 1.)
❍: Counts up.
✕: Does not count up.
∆: Follows SIM 26-52 setting.
0: Does not count up. (Japan/SCA default) 1: Counts up. (Other default)
—: Out of target (No print process)
(9) Consumables counter specification
Total output counter (Total valid paper counter) Total counter
Display when the copy key is ON. ■ —
List print ■ —
Valid paper counter to send to serial RIC ■ —
Total counter to send to serial RIC
■ —
E-RIC mail text counter ■ —
E-RIC attached file ■
(Counter for the first send)
■
(Counter to send in the midst of packet)
SIMULATION Displayed/printed as Total output. Displayed/printed as Total
1
Mode Print mode
Count attribute Blank paper count setting (SIM 26-52)
Remark
Print surface 0:NO 1:YES
Front
surface
Back
surface
Small
size
Large
size
Small
size
Large
size
Normal Without print (Invalid paper exit) ✕ — 0000
Without print (Blank paper
insertion)
∆ — 0 0 1 2 (1) *1
Single face print (Single face mode) ❍ — 1 2 (1) *1 1 2 (1) *1 SS/DS
Single face print (Duplex mode) ❍✕ 1 2 (1) *1 1 2 (1) *1 SD (Odd number of documents)
Duplex print
❍❍ 2 4 (2) *1 2 4 (2) *1
SD (Even number of documents)/
DD
Front
cover
Without print ∆ — 0 0 1 2 (1) *1
With print (Single face) ❍ — 1 2 (1) *1 1 2 (1) *1
With print (Duplex) ❍❍ 2 4 (2) *1 2 4 (2) *1
Back
cover
Without print ✕ ∆ 0 0 1 2 (1) *1
With print (Single face) ✕❍1 2 (1) *1 1 2 (1) *1
With print (Duplex) ❍❍ 2 4 (2) *1 2 4 (2) *1
Insert
paper
Without print ∆ — 0 0 1 2 (1) *1
With print (Single face) ❍ — 1 2 (1) *1 1 2 (1) *1
With print (Duplex) ❍❍ 2 4 (2) *1 2 4 (2) *1
OHP
insert
paper
Without print ∆ — 0 0 1 2 (1) *1
With print (Single face) ❍ — 1 2 (1) *1 1 2 (1) *1
With print (Duplex) ——————Duplex print inhibition
Counter Count-up timing
Count-up number
Counter
reset
procedure,
clear
Simplex print Duplex print
Paper feed tray –
Main unit paper exit
Paper feed tray –
ADU
ADU – Main unit
paper exit
Small size Large size Small size Large size Small size Large size
OPC drum counter When transfer is completed 1 2 (1) 1 2 (1) 1 2 (1) Sim24-7
OPC drum rotation counter (sec) When transfer is completed ——————Sim24-11
Developer counter When transfer is completed 1 2 (1) 1 2 (1) 1 2 (1) Sim24-5
Developing roller rotation counter
(sec)
When transfer is completed
——————Sim24-11
Toner counter When transfer is completed 1 2 (1) 1 2 (1) 1 2 (1) —
Toner supply counter (sec) When transfer is completed —————— —
To Next Page
Loading...
