: Feb. 9 2004
1
AR-M550/M620/M700 SIMULATION 8 - 97
Operation/Procedure
(Display message)
Operation/Procedure
1) Enter the number corresponding to the select IN signal YES/NO
setting with 10-key.
2) Press [START] key.
When the printer parallel I/F is used and a trouble is generated in the
communication between the PC and the printer, change the setting of
this simulation.
Operation/Procedure
During check, "CHECKING" is displayed. When check is completed
normally, "OK" is displayed. In case of an error, "NG" is displayed.
(Display message)
Press 1 and press [START] key. Press [CUSTOM SETTINGS] key.
67
67-2
Purpose Operation test/Check
Function
(Purpose)
Used to check the operation of the parallel I/F of the
printer. (This simulation is for production only, and
requires a special tool for execution. Not used in the
market.)
Section MFP controller
Item Operation Interface/Communication
WAITING Waiting
READY Check start OK
OK Check end (Normal)
STAGE*NG Check end (Error in stage *. *: 1 - 11)
SIMULATION 66-60
ACR SETTING. SELECT NUMBER, AND PRESS START.
SWITCHING OF MENU:[#]
1.Local Carrier Number 2.Long-distance Carrier Number
3.Overseas Carrier Number 4.Bypass Number
5.User Area Code 6.Machine Code
7.Version 8.Through Number1
9.Through Number2 10.Through Number3
11.Through Number4 12.Through Number5
13.Through Number6 14.Through Number7
15.Through Number8 15.Through Number9
17.Through Number10 18.Through Number11
SIMULATION 66-60
ACR SETTING. SELECT NUMBER, AND PRESS START.
SWITCHING OF MENU:[#]
19.Through Number12 20.Through Number13
21.Through Number14 22.Through Number15
23.Through Number16 24.Through Number17
25.Through Number18 26.Through Number19
27.Through Number20 28.Through Number21
29.Through Number22 30.Reserve Through Number1
31.Reserve Through Number2 32.Reserve Through Number3
33.Reserve Through Number4 34.Reserve Through Number5
35.Reserve Through Number6 36.Reserve Through Number7
1
1
SIMULATION 66-60
ACR SETTING. SELECT NUMBER, AND PRESS START.
SWITCHING OF MENU:[#]
37.Reserve Through Number8
1
[#/P] key
[#/P] key
[#/P] key
1
SIMULATION 66-60
ACR SETTING.
Local Carrier Number:0-9:[0-9],
9999
lWith READY displayed,
press [START] key.
Press [CUSTOM SETTINGS] key.
67-11
Purpose Setting
Function
(Purpose)
Used to set YES/NO of the parallel I/F select signal of
the printer.
Section MFP controller
Item Operation Interface/Communication
Item Default
0OFF
0 (AR-M550U, AR-M620U, AR-M700U)
1 (AR-M550N, AR-M620N, AR-M700N)
1ON
67-16
Purpose Operation test/Check
Function
(Purpose)
Used to check the operation of the network card.
Section MFP controller
Item Operation Interface/Communication
CHECKING Checking
OK Check end (Normal)
NG Check end (Error)
Check end Press [CUSTOM SETTINGS] key.
SIMULATION 67-2
CENTRO PORT CHECK.
CENTRO PORT: READY
SIMULATION 67-2
CENTRO PORT CHECK.
CENTRO PORT: OK (or STAGE7 NG)
1
SIMULATION 67-11
CENTRO SELECT IN SIGNAL SETTING. SELECT 0-1, AND PRESS
START.
0. OFF
1. ON
SIMULATION 67-16
NETWORK INTERFACE CARD CHECK.
NIC: CHECKING
SIMULATION 67-16
NETWORK INTERFACE CARD CHECK.
NIC: OK (or NG)
To Next Page
Loading...
