7-94
SYSTEM SETTINGS
Contents
This section explains system settings that are specifically for the fax function.
The system settings for the fax function can only be configured when the facsimile expansion kit is installed.
System Settings for Fax (General) List
When the system settings for fax are accessed with general rights, the following items appear. For items that can only
be accessed with administrator rights, see "System Settings for Fax (Administrator) List" (page 7-100).
Address Control
Fax Data Receive/Forward
* When a finisher is installed.
SYSTEM SETTINGS FOR FAX
Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Item Factory default setting Page
■ Address Control
7-95
● Address Book – 7-95
● F-Code Memory Box – 7-97
Item Factory default setting Page
■ Fax Data Receive/Forward
7-99
● Fax Settings
7-99
X Receive Setting Auto Reception
X Multiple Set Print Disabled
X Staple* Disabled
X Forward Received Data –
To Next Page
Loading...
Need help?
General
