INSTALLING THE SOFTWARE
49
5
11
Click the "Next" button.
12
Click the "Yes" button in the confirmation dialog box that
appears.
Go to step 11.
LPR (TCP/IP) direct printing
After step 1-7 on page 47
8
Click the "Printer Driver"
button.
If you have not set the IP Address,
click the "Set the IP Address"
button first and go to step 8 on page
48.
9
Read the message in the
"Welcome" window and then click the "Next" button.
10
Select "LPR Direct Print" and
click the "Next" button.
11
The printer or printers
connected to the network will
be detected. Click the printer
to be configured (the
machine) and click the "Next"
button.
If the machine's IP address cannot be found, make sure the machine is
powered on, make sure the network cable is connected correctly, and
then click the "Search" button.
Note
!FO-2080.book 49 ページ ２００９年５月１５日 金曜日 午前１０時４２分
To Next Page
Loading...
