Sharp LC-26SH330E

Use Sound Mode
Apartfrommanuallyadjustingsoundsettings,you
canuseSound ModetosetyourTVtoapredefined
soundsetting.
1� Press MENU on the remote control and select
Sound.
2� Press OK or ≥ to enter Sound and select
Sound Mode�
3� Press ≤≥ to select one of the following
settings:
• Personal
• Music
• Speech
4� Follow the on-screen instructions to exit.
TV
ThefirsttimeyousetupyourTV,youarepromptedto
selectanappropriatemenulanguageandtoperform
automaticinstallationofTVanddigitalradiochannels
(Ifavailable).
Thischapterprovidesinstructionsonhowtoreinstall
channelsaswellasotherusefulchannelinstallation
features.
NOTE
• Re-installingchannelsmodifiesthechannellist.
Select a digital audio language
1� Press MENU on the remote control and select
TV.
2� Press OK or ≥ to enter TV menu.
3� Press <> to select 1st Audio or 2nd Audio.
4� Highlight your selection and press ≤≥ to select
an audio language.
5� Follow the on-screen instructions to exit.
NOTE
• Ifyourselectedaudiolanguageisnotbroadcasted,the
defaultaudiolanguagewillbedisplayed.
Automatically install channels
Thissectiondescribeshowtosearchandstore
channelsautomatically.Instructionsareforbothdigital
andanaloguechannels.
Step 1: Select your Tuner Mode
1� Press MENU on your remote control and select
TV ≥ Tuner Mode.
2� Press ≤≥ to select Antenna or Cable.
3� Follow the on-screen instructions to exit.
TV menu
Step 2: Select your country
Selectthecountrywhereyouarelocated.TheTV
installsandarrangeschannelsaccordingtoyour
country.
1� Press MENU on the remote control and select
TV ≥ Country.
2� Press ≤≥ to select your country.
3� Follow the on-screen instructions to exit.
Step 3: Automatic channel scan
YourTVsearchesandstoresallavailabledigitaland
analogueTVchannelsaswellasallavailabledigital
radiochannels.
1� Press MENU on the remote control and select
TV ≥ Channels�
NOTE
• Youarepromptedtoentercurrentpasswordtoenter
ChannelsifChannel Block/Parental Guidance/
Input BlockintheParentalmenuisnotthedefault
setting.
2� Select Channel Scan and press OK or ≥
and select ATV only or ATV and DTV to start
channel installation. The installation may take a
few minutes.
3� When complete, follow the on-screen
instructions to exit.
E Update Scan
Update ScanhassimilarfunctionwithChannel Scan.
Thedifferenceisyoucouldupdatechannellistwithout
erasingtheoriginalinformation.
NOTE
• ThisfunctionisforAntennamodeonly.
1� Press MENU on the remote control and select
TV ≥ Channels.
NOTE
• Youarepromptedtoentercurrentpasswordtoenter
ChannelsifChannel Block/Parental Guidance/
Input BlockintheParentalmenuisnotthedefault
setting.
2� Press <> to select Update Scan and press
OK or ≥ to start channel update.
3� When complete, follow the on-screen
instructions to exit.
13