Sharp LC-26SH330E - Set; Change Password; Clear All Parental Settings; Eco

Set / Change password
1� Enter your password to access the Parental
menu.
2� Press <> to select Set Password and press
OK or ≥ to enter.
3� Enter your new password in the New box by
using the digit buttons on the remote control.
4� Enter your new password again in the Confirm
box.
5� When complete, the TV reruns to the Parental
menu.
6� Repeat step 1 to 4 to change password.
Clear all parental settings
ResetallthesettingsintheParentalmenu.
1� Enter your password to access the Parental
menu.
2� Press <> to select Clear All and press OK or
≥ to enter.
3� Select OK and press OK on the remote control
to clear all parental settings.
NOTE
• Ifparentalsettingsarecleared,youdonothavetoenter
passwordtoaccessChannelsintheTVmenu.
Eco
Thisfunctionenablesyoutoautomaticallyreducethe
backlightbrightnessinordertodecreasethepower
consumptionandincreasethebacklightlifespan.
1� Press MENU on the remote control and select
Eco and press OK or ≥ to enter�
2� Press <> to select On or Off and press ≥ to
activate the selection.
3� Follow the on-screen instructions to exit.
TV menu
21