MX-5111N MX-PNX5A/B/C/D (PUNCH MODULE) 13 – 3
11) Fix the rear cover with a screw.
12) Install the saddle finisher to the main unit.
B. Punch jam processing label attachment
1) Open the front cover, apply the punch jam processing label
(Packed items) in position as shown in the figure.
C. Punch position label attachment
1) Attach the punch position label to the position indicated in the
figure.
For scanner
For DSPF/RSPF
DSPF
RSPF
R2.5 connection line
Edge line R 2.5
CAUTION
Cleaning of the document scan section
When streaks appear on copy or scan
images, open the automatic document
feed unit and clean the document scan
section with the glass cleaner (accessory).
Document scan section
To Next Page
Loading...
