MX-5111N MX-FN11 (FINISHER) 14 – 10
K. Connection of connector to the main unit
1) Connect two connectors of the finisher to the main unit, and
tighten the screws.
L. Staple position label attachment
1) Attach the staple position label (Packed items) to the position
indicated in the figure.
For scanner
For DSPF/RSPF
M. Turn on the power of the main unit
1) Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
DSPF
RSPF
Cleaning of the document scan section
CAUTION
When streaks appear on copy or scan
images, open the automatic document
feed unit and clean the document scan
section with the glass cleaner (accessory).
To Next Page
Loading...
