5-16
SCANNER►SCANNER SEQUENCE
ADJUSTING THE SHARPNESS OF AN IMAGE
(SHARPNESS)
This function adjusts the sharpness to make a sharper or softer image.
Sharpness must be specified before scanning the original.
1
Press the [SPECIAL FUNCTION] key, select "Special Modes" with the [ ][ ]
keys, and press the [OK] key.
2
Select "Sharpness" with the [ ] [ ] keys and press the [OK] key.
3
Select "Off", "Soft", or "Sharp" with the [ ][ ] keys and press the [OK] key.
To cancel the sharpness setting:
Select "Off" with the [ ][ ] keys and press the [OK] key.
To Next Page
Loading...
