1-19
BEFORE USING THE MACHINEâ–ºLOADING PAPER
Types of paper that can be set in each tray
*1 when a 600-sheet paper feed unit is installed
*2 "Plain Paper 1" is plain paper 16 to 24 lbs. bond (60 to 89 g/m
2
), "Plain Paper 2" is plain paper 24 to 28 lbs. bond
(90 to 105 g/m
2
).
*3 "Heavy Paper 1" is heavy paper up to 65 lbs. cover (176 g/m
2
), "Heavy Paper 2" is heavy paper up to 80 lbs. cover
(220 g/m
2
).
• For detailed information on the sizes and types of paper that can be loaded into each tray of the machine, see
"SPECIFICATIONS" in the "Start Guide".
• Recycled paper, colored paper and pre-punched paper must meet the same specifications as plain paper.
Before using any paper, consult the dealer or nearest SHARP Service Department.
Tray 1 Tray 2
*1
Bypass tray
Plain Paper 1
*
2
Permitted Permitted Permitted
Plain Paper 2
*
2
Permitted Permitted Permitted
Heavy Paper 1*
3
- Permitted Permitted
Heavy Paper 2*
3
- Permitted Permitted
Thin Paper - Permitted Permitted
Pre-Printed Permitted Permitted Permitted
Recycle Paper Permitted Permitted Permitted
Letter Head Permitted Permitted Permitted
Pre-Punched Permitted Permitted Permitted
Color Permitted Permitted Permitted
Labels - - Permitted
Glossy Paper - - Permitted
Transparency - - Permitted
Envelope - - Permitted
To Next Page
Loading...
Need help?
General
