1-23
BEFORE USING THE MACHINEâ–ºLOADING PAPER
4
Insert the paper into the tray.
Load the paper with the print side facing up. The stack must
not be higher than the indicator line (Tray 1: maximum of
500 sheets (Maximum of 150 sheets of A6 paper), tray 2:
maximum of 600 sheets).
• If a paper misfeed occurs, turn the paper over and/or around, and reload.
• If the paper is curled, fix the curl before loading the paper.
• Adjust the divider plate so that there is no gap between the paper and divider plate.
• Do not add paper.
• Do not load the paper as shown below.
5
Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine slowly.
Forcefully inserting the paper may cause skewed feeding
and paper misfeeds.
To Next Page
Loading...
Need help?
General
