1-95
BEFORE USING THE MACHINE
• After installation, see "CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE
MACHINE" (page 1-98) to configure the printer driver settings.
• Make sure that the port of the installed driver is the same as the port used by the PCL6 printer driver.
The port used by the printer driver of the machine is indicated by a checkmark on the [Ports] tab of the printer driver
properties window.
☞ CHANGING THE PORT (page 1-105)
• If you installed the PS printer driver or the PPD driver, the PS display fonts can be installed from the "PRINTER
UTILITIES" CD-ROM that accompanies the PS3 expansion kit. See "INSTALLING THE PS DISPLAY FONTS" (page
1-104).
To Next Page
Loading...
Need help?
General
