7-32
SYSTEM SETTINGS
System Settings (Administrator) List
The system settings that appear following administrator login are shown below. The default setting for each item is also
shown.
User Control
*1 This cannot be set on the machine. Set this in "User Control" in the Web pages.
*2 When the HID card reader is available.
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
• For information on the general settings, see "System Settings (General) List" (page 7-6).
• For explanations of settings related to the fax function, see "SYSTEM SETTINGS FOR FAX" (page 7-102).
Item Factory default setting Page
■ User Control
7-49
● User Authentication Setting 7-49
User Authentication Disabled 7-49
Authentication Method Setting Authenticate a User by Login Name
and Password
7-49
Device Account Mode Setting Disabled 7-49
● Other Settings 7-50
Actions when the Limit of Pages for Output Jobs Job is Completed even when the Limit
of Pages is Reached
7-50
The Number of User Name Displayed Setting
12 7-50
A Warning when Login Fails Disabled 7-50
Disabling of Printing by Invalid User Disabled 7-50
Automatically print stored jobs after login Disabled 7-50
Default Network Authentication Server Setting – 7-50
Perform LDAP server access control. Disabled 7-51
Display Usage Status after Login – 7-52
User Information Print – 7-52
● User List – 7-53
● Page Limit Group List – 7-55
● Authority Group List – 7-56
● Favorite Operation Group List*
1
– 7-59
Favorite Operation Group Registration*
1
– 7-59
My Menu List*
1
– 7-60
● User Count – 7-61
● Card Settings*
2
– 7-62
Card Reader Device Registration – 7-62
To Next Page
Loading...
Need help?
General
