7-38
SYSTEM SETTINGS
Printer Settings
* When the printer function is available.
Image Send Settings
Item Factory default setting Page
■ Printer Settings*
7-77
● Default Settings 7-77
Prohibit Notice Page Printing Enabled 7-77
Prohibit Test Page Printing Disabled 7-77
A4/Letter Size Auto Change Disabled 7-77
Print Density Level 3 7-77
Bypass Tray Settings 7-77
Enable Detected Paper Size in Bypass Tray Disabled 7-77
Enable Selected Paper Type in Bypass Tray Enabled 7-77
Exclude Bypass-Tray from Auto Paper Select Disabled 7-77
Job Spool Queuing Enabled 7-77
Disabling of USB Memory Direct Print Disabled 7-77
Disabling of Network Folder Direct Print Disabled 7-77
● Interface Settings 7-78
Hexadecimal Dump Mode Disabled 7-78
I/O Timeout 60 sec. 7-78
Enable USB Port Enabled 7-78
USB Port Emulation Switching Auto 7-78
Enable Network Port Enabled 7-78
Network Port Emulation Switching Auto 7-78
Port Switching Method Switch at End of Job 7-78
Item Factory default setting Page
■ Image Send Settings
7-79
● Operation Settings 7-79
Other Settings 7-79
Default Display Settings Scan (fax when fax is installed)
7-79
• Hold settings for a while after scanning has been
completed
Disabled
Address Book Default Selection Tab Switch: ABC, Address Type: All 7-79
To Next Page
Loading...
Need help?
General
