Sharp MX-M623U User Manual

7-37
SYSTEM SETTINGS
Contents
* When a saddle stitch finisher is installed.
Network Settings
 Disabling Deletion of Job Programs Disabled 7-75
 Disabling of Bypass-Tray in Duplex Copy Disabled 7-75
 Disabling of Auto Paper Selection Disabled 7-75
 Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-75
 600dpi x 600dpi Scanning Mode for Document Feeder Disabled 7-75
 Quick Scan from Document Glass Enabled 7-75
 Auto Clear Before Copy Job Execution Disabled 7-75
Item Factory default setting Page
■ Network Settings
7-76
● IPv4 Settings DHCP 7-76
● IPv6 Settings Disabled 7-76
● Enable TCP/IP Enabled 7-76
● Enable NetWare Enabled 7-76
● Enable EtherTalk Enabled 7-76
● Enable NetBEUI Enabled 7-76
● Reset the NIC – 7-76
● Ping Command – 7-76
Item Factory default setting Page

Sharp MX-M623U Specifications

General

Brand	Sharp
Model	MX-M623U
Category	All in One Printer
Language	English