1-113
BEFORE USING THE MACHINE
This completes the configuration of the printer driver.
15
Display printer information.
(1) Click the machine's name.
If you are using Mac OS X v10.5 to 10.5.8 or v10.6, click
the [Options & Supplies] button, click the [Driver] tab and
go to step 16.
(2) Click [Show Info].
If you are using Mac OS X v10.2.8, select [Show Info]
from the [Printers] menu.
16
Select the machine configuration.
If you selected [Auto Select] in (3) of step 14, the machine configuration is detected and automatically configured. Check the
configured settings to make sure they are correct.
(1) Select [Installable Options].
If you are using Mac OS X v10.5 to 10.5.8 or v10.6, it does not appear.
(2) Select the options that are installed on the machine.
(3) Click the [Apply Changes] button.
If you are using Mac OS X v10.5 to 10.5.8 or v10.6, click the [OK] button.
(4) Click to close the window.
You can check the options that are installed on the machine by printing out the "All Custom Setting List" in the system
settings. (However, note that "Input Tray Options" must be set to the number of trays on the machine.) The "All
Custom Settings List" can be printed from [List Print (User)] in the system settings.
(1)
(2)
To Next Page
Loading...
Need help?
General
