7-41
SYSTEM SETTINGS
*1 When the network scanner function is available.
*2 When the Internet fax expansion kit is installed.
*3 When the facsimile expansion kit is installed.
*4 When network connection is enabled.
Transaction Report Print Select Setting
7-85
• Single Sending Print Out Error Report Only
• Broadcasting Print Out All Report
• Receiving No Printed Report
Activity Report Print Select Setting
7-86• Auto Print at Memory Full Disabled
• Print Daily at Designated Time Disabled
Body Text Print Select Setting Disabled 7-86
Pre-Setting Mail Signature Disabled 7-86
I-Fax Send Settings 7-86
I-Fax Reception Report On/Off Setting Disabled 7-86
I-Fax Reception Report Request Timeout Setting 1 hour 7-86
Number of Resend Times at Reception Error 2 7-86
Maximum Size of E-mail Attachments Unlimited 7-86
Rotation Sending Setting All Enabled 7-87
Printing Page Number at Receiver Enabled 7-87
Recall in Case of Line Busy Times: 2, Interval 3 min. 7-87
Recall in Case of Communication Error Times: 2, Interval 3 min. 7-87
I-Fax Receive Settings 7-87
Auto Receive Reduce Setting Enabled 7-87
Duplex Reception Setting Disabled 7-87
Set Address for Data Forwarding –
7-87
• Direct SMTP Disabled
• Add Hostname or IP Address Too Disabled
• Hostname or IP Address –
Receiving Date & Time Print Disabled 7-88
A3 RX Reduce Disabled 7-88
POP3 Communication Timeout Setting 60 sec. 7-88
Reception Check Interval Setting 5 min. 7-88
I-Fax Output Setting Varies depending on the machine
configuration
7-88
Allow/Reject Mail or Domain Name Setting All Invalid 7-88
Item Factory default setting Page
To Next Page
Loading...
Need help?
General
