Copyright © All rights reserved, SHARP CORPORATION
Confidential
31
3.6.Precautions in installing and handling 1
The LCD screen is made of glass. Use carrying handles by the edge of the rear display when installing and carrying. Do not
apply physical pressure to the bezel (e.g. by bending, pulling). It may cause damage failures.
CAUTION: DO NOT grab, impact, or apply pressure to the top/bottom/left /right/front/rear of the frame.
This may cause injury or malfunction.
CAUTION: DO NOT load
another display on the top
of the bezel of a display.
This may cause product
damage and failures.
Protective film
Remove the protective film
just before the final
installation.
When removing, detach the
film carefully to avoid
damaging the LCD.
To Next Page
Loading...
