Copyright © All rights reserved, SHARP CORPORATION
Confidential
57
Use Screen Image
(V Series2)Display
Installation Tool
with Calibration Utility
Note: This software can be
used with same as PN-
V701/V550A. It can not be
used with PN-V60X series
Calibration function
(V Series2)Display Installation Tool and calibration function.
*Calibration function can be used if factory measurement data is
acquired. Calibration with measurement data by separately sold
sensors is also available.
<Sharp provides this software>*
Use Screen Image
(V Series2)Display
Installation Tool
Note: This software can be
used with same as PN-
V701/V550A. It can not be
used with PN-V60X series
Control PN-V701 from PC
- Turn power on/off, switch input signal, change settings etc.
- Control multiple information displays
- Backup and restore display settings
<Sharp provides this software>
4.8.Software tool 1
* For more information about this software, contact our sales reps or the dealer/reseller from which you purchased the main unit.
To Next Page
Loading...
