Sharp PN-V701 - A List of Optional;Recommendation Tools Peripheral Devices

Copyright © All rights reserved, SHARP CORPORATION
Confidential
62
5.1. A list of optional/recommendation tools peripheral devices
- The table below is a list of evaluated peripheral devices.
- Refer to the operation manual of each product for the installation method of peripheral devices in detail.
Product Name
Contents
Orientation
Model Name
Manufacturer
Dimensions (W x D x H) (approx.)
Weight
(approx.)
Floor Stand
Landscape x 4 displays
Caster type
Landscape
LVM3X2U*
1
CHIEF 1,893mm x 1,026mm x 2,743mm 84kg
Portrait x 3 displays
Caster type
Portrait
LVM2X2U*
2
CHIEF 1,893mm x 1,026mm x 1,829mm 54kg
LVM3X1UP*
2
CHIEF 1,893mm x 1,026mm x 1,727mm 55kg
Landscape x 4 displays
Anchor fixing type
Landscape
LBM3X2U*
1
*
3
CHIEF 1,686mm x 239mm x 2,743mm 64kg
Portrait x 3 displays
Anchor fixing type
Portrait
LBM2X2U*
2
*
4
CHIEF 1,686mm x 239mm x 1,829mm 45kg
LBM3X1UP*
2
*
4
CHIEF 1,688mm x 244mm x 1,727mm 44kg
Wall
-
mounted
fittings
Pantograph type*
5
with (tilting/height/depth) adjustment
Landscape
LVS1U CHIEF 903mm x 101~348mm x 485mm 17kg
Portrait
LVS1UP CHIEF 496mm x 104~351mm x 825mm 16kg
Pantograph type*
5
(with a location adjustment function)
Landscape
/Portrait
FTK-WM-M400B
Japan
F/S
(only Japan)
560mm x 119~326mm x 431mm 21kg
Tilt angle adjustment type
Landscape
/Portrait
FFP-NM10-WA
Japan
F/S
(only Japan)
460mm x 70mm x 500mm 7.5kg
Control Kit
(Remote control unit + Receiving section)
― PN-ZR02 SHARP ― ―
HDBaseT receiving board ― PN-ZB03H SHARP ― ―
* 1 Requires three “Height Expansion Kit (FCABX18)” for installation.
* 2 Requires one “Extender Kit (FCAX20)” for installation.
* 3 Requires three “Reinforced Base (AVC-LBM4)”.
* 4 Requires two “Reinforced Base (AVC-LBM4)”.
* 5 Displays can be wired or installed with the fittings stretched, however DO NOT leave it stretched or DO NOT do other work under it.
Note: Contact the manufacturer directly for detailed information about the products except for those offered by SHARP.