Copyright © All rights reserved, SHARP CORPORATION
Confidential
69
5.5.Installation tool 1
Product Name (temporary) Use Image
Installation handle
(UKOG-1005MPZ1)
For lifting the PN-V701 up to a high location
- It is inserted into holes on the top of the display, enabling lifting
the PN-V701 up to a high location during installation.
- It is inserted into holes on the top and the side of the display,
enabling lifting it up for portrait orientation.
- Requires two pieces for one display.
- This installation handle is to improve the efficiency of
installation. Use it as necessary.
Installation handle 2
(UKOG-1014MPZ1)
For lifting the PN-V701 up to a high location
- It is inserted into holes on the top of the display, enabling lifting
the PN-V701 up to a high location during installation.
- It is inserted into holes on the top and the side of the display,
enabling lifting it up for portrait orientation.
- Requires two pieces for one display.
- It is the same function as UKOG-1005MPZZ.
- This installation handle is to improve the efficiency of
installation. Use it as necessary.
Installation eyebolt
(UKOG-1006MPZ1)
For a crane to lift the PN-V701 up to a high location
- It is inserted into holes on the top of the display, enabling lifting
the PN-V701 up by using a crane.
- Requires two pieces for one display.
- This installation eyebolt is to improve the efficiency of
installation. Use it as necessary.
We provide the following service parts for installation (for a fee).
Note: Contact the dealer from which you purchased the main unit or our sales reps if you need above tools.
To Next Page
Loading...
