Sharp PN-V701 - Select Uniformity Mode

Copyright © All rights reserved, SHARP CORPORATION
Confidential
53
4.4.Select uniformity mode (3)
- Sharp Advanced UCCT*
1
ensures uniformity of color and brightness
across the entire LCD monitor by properly adjusting color levels with high precision and high
definition (at the pixel level).
- The factory default setting for Uniformity is [MODE1].
You can change the mode according to the purpose of use.
*1 SHARP Advanced Uniform Color Calibration Technology
[Setting 2]
Using a remote control unit.
[MENU]→[Picture]→[Uniformity]
Factory
default
setting
Uniformity
Usage Brightness
Mode 1
Priority on
Brightness
Equivalent to 700cd/
㎡
Mode 2
Intermediate
Equivalent to 600cd/
㎡
Mode 3
Priority on
Uniformity
Equivalent to 500cd/
㎡
■Image of color uniformity calibration
by Sharp UCCT
<Before Calibration> <After Calibration>
*2 DITwC… Display Installation Tool with Calibration Utility. Refer to DITwC manual for further information.
[Setting 1]
Using DITwC*
2
. [UNIFORMITY]