Copyright © All rights reserved, SHARP CORPORATION
Confidential
3
1.1 Procedures of installation
(Please thoroughly observe these recommendations) 1
Check worker’s
clothes and their
belongings.
Wear simple clothes and do NOT
put their mobile phone and/or pen
in their pocket.
We recommend that the following procedures are entrusted to Sharp sales subsidiaries or
dealers/contractors trained by Sharp.
1
2
The person responsible
for installation directly explains and
shows how to handle the display
securely to the workers before start
installing.
3
Prior Explanation
◼ How to open the package box of display.
◼ How to take the display from the box.
◼ How to hold the display/holding positions
◼ How to temporarily store the display after taking it from the box.
(We recommend storing the display temporarily on a temporary stand.)
◼ How to check and/or store the accessories of display.
4
Install a stand and wall-mounting
brackets.
This model requires close attention to handling due to its thin
bezel. Even dealers or workers familiar with the conventional
models must confirm precautions beforehand Study the
installation guide of this model and stands recommended by BC
Company SHARP as much as possible, and entrust the
installation work to Sharp sales subsidiaries or dealers /contractors
trained by Sharp.
◼Consider the fan
◼Consider the adjacent
positioning
Do not work alone. Make sure to
work with two or more people.
Make enough
working space
before working on.
Check power cable and floor
evenness.
To Next Page
Loading...
