Copyright © All rights reserved, SHARP CORPORATION
Confidential
41
Precaution
In portrait orientation, rotate the display clockwise at 90°viewed from the front. (same as
PN-V series)
◆ When installing the display in portrait orientation, make sure to affix
the mounting plate in the correct orientation by confirming the “UP” label.
(Never mount upside-down)
◆ In portrait orientation, change the [THERMAL SENSOR SETTING ] of
OSD to [PORTRAIT]. If the setting remains landscape in portrait
orientation, the temperature sensor does not work properly.
This Side Up Label
3.10.Rotate direction for portrait mounting
Front
Front
[MENU]-[MONITOR]-[ROTATE 180°]-[ON]
1 2 3
1 2 3
When video is displayed upside-down in portrait
orientation, set the video orientation to rotate the
displaying at 180 °from MENU.
[MENU]-[MONITOR]-[ROTATE 180°]-[OFF]
To Next Page
Loading...
