Copyright © All rights reserved, SHARP CORPORATION
Confidential
40
3.9.Precautions for mounting on the wall 2
Pantograph type metal fittings
Do not apply the load on the top of the bezel by
leaning against displays in wiring.
Use the pulling wire when you want to put in
displays.
Do not push displays directly.
Pantograph type metal fittings
When you use pantograph type metal fittings, put
them in/out slowly so that displays won’t collide
with each other.
Pantograph type metal fittings
×
Pulling wire
×
×
To Next Page
Loading...
