Copyright © All rights reserved, SHARP CORPORATION
Confidential
52
4.3.Auto color adjustment by DITwC* (2)
2. Select the layout file
3. Send adjusted value of “R/G/B Contrast ” and
“Brightness Value” to each display simultaneously.
Based on calculated layout, brightness/color variation between displays can be minimized by
adjusting each display “R/G/B contrast” and “brightness value.”
1. Set up network connection (LAN)
and register each display in Monitor
Control.
Refer to the Display Installation Tool manual for detailed
information.
*DITwC… Display Installation Tool with Calibration Utility
Refer to DITwC manual for further information
LAN
Hub
*Adjusts each item of [MENU]-[PICTURE]-[COLOR ADJUSTMENT]-[ADJUST UNIFORMITY] of N-V701.
To Next Page
Loading...
