Copyright © All rights reserved, SHARP CORPORATION
Confidential
64
5.3.Control Kit PN-ZR02
All of the displays of a video wall can be conveniently operated through one remote control
unit by installing a remote control sensor box in one of the PN-V701 of a video wall. (Up to
25 units)
Note: Connect all displays in daisy chain with RS232C cable, and attach the sensor box at
the top of the display.
Remote Control
Unit
Remote Control
Sensor Box
This model is not compatible with
Remote Control Sensor Box
in PN-ZR01A for V55 and
in PN-ZR01 for V60 due to the
differences in an internal substrate.
The old remote controller can be used
Note: The [BRIGHT] and [VOL] buttons
to adjust brightness and volume are invalid.
You can adjust them from [MENU].
-Brightness: [MENU] - [PICTURE] - [BRIGHT]
-Volume: [MENU] - [OTHERS] - [VOLUME]
To Next Page
Loading...
