Copyright © All rights reserved, SHARP CORPORATION
Confidential
37
Stand with caster
・Take measures to prevent displays from falling in preparation for
earthquake. (e.g. by fixing displays firmly with wire or anchor etc.)
Floor stand with caster
3.8.Precautions on stand installation 2
・Do not install with a stand for the purpose of carrying displays.
It may cause failures due to the vibration or collision between
displays.
・The floor stand with caster offered by CHIEF is recommended.
It is designed for adjusting the installation location. Do not install it
for the purpose of carrying displays.
Do not combine stands to install displays. It may cause
failures due to a collision between displays.
Stand
×
To Next Page
Loading...
