Copyright © All rights reserved, SHARP CORPORATION
Confidential
66
Manufacturer Model Number Category
HDMI
No
*4
No
*4
No
*1 Set [SETUP]-[INPUT SELECT]-[HDMI CEC LINK] to [AUTO] in display menu.
*2 Set [SETUP]-[COMMUNICATION SETTING]-[CONTROL ROUTE] to [OPTION] in display menu.
When [CONTROL ROUTE] is set to [OPTION], you cannot set [POWER SAVE MODE] to [ON].
*3 The communication speed is fixed to 9600 bps.
*4 When HDC-S400 is combined, the controlling function by RS-232C and LAN are not available.
*5 When MSD-702 and HDC-S400 are combined, HDMI CEC function does not work properly.
*6 You can connect a USB mouse or keyboard (HID class).
*7 If using an Extron device, set [SETUP] – [COMMUNICATION SETTING] – [EXTRON XTP] to [ON].
● Combining with the listed devices does not guarantee proper operation.
● This does not guarantee operation with all hardware and firmware versions.
PC or AV devices connecting to HDBaseT transmitter may affect operation or it may not work properly depending on the operating environment.
● Contact the manufacturer for further information about the devices listed above.
● The information above is subject to change without notice.
5.4.HDBaseT Receiver Board (PN-ZB03H) 2
Tested Equipment Compatible with PN-ZB03H (As of Mar. 2017)