GB-10
ITALIANOESPAÑOL
ENGLISH
BEFORE OPERATION
SELECTING THE LANGUAGE
USING THE STOP KEY
Your oven has an energy save mode.
1. Plug in the oven. Nothing will appear on the
display at this time.
2. Open the door. The oven lamp will light while the
door is open.
The oven display will show “SELECT LANGUAGE”
in 5 languages.
NOTE: Once you select the language using the
LANGUAGE key, the display will show “. 0“.
3. Close the door.
The oven display will show “. 0“.
4. Select a language (See below).
NOTE: If you use the oven in English, you do not
have to select language, and go to step 5.
Example:
Suppose you want to select German:
1. Choose the desired language
by pressing the LANGUAGE key.
2.
Press the (START)/+1min key
to start the setting.
Check the display.
x2
x1
NOTE: The selected language will be memorised even if the electical power supply is interrupted.
In Energy Save Mode, if you do not operate the oven for 3 minutes or more (e.g. closing the door, pressing the
STOP key, or at the end of cooking), you will not be able to operate the oven until you open and close the oven
door.
5. Heat the oven without food (See page GB-13).
COOKING HINTS:
The oven has an ‘Information Display System’ which
offers you step by step instructions to easily guide
you through each feature, and enable you to gain
information in your desired language. The oven has
an INFO key for getting instructions for each key.
Indicators will appear in the display, after pressing a
key, to inform you of the next operation step.
Press LANGUAGE key LANGUAGE
once
twice
3 times
4 times
5 times
ENGLISH
DEUTSCH
NEDERLANDS
FRANÇAIS
ESPAÑOL
The oven comes set for English. You can change the
language. To change, press the LANGUAGE key
until the desired language is displayed. Then press the
(START)/+1min key.
Use the STOP key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press the
STOP key twice.
To Next Page
Loading...
Need help?
General
