What to do if Sharp UX-53 keys are not responding?
If the Sharp Fax Machine does not respond when you press any keys, and no beep sound is heard, unplug the power cord and plug it back in after a few seconds.
Why is dialing not possible on my Sharp UX-53 Fax Machine?
If you are unable to dial on your Sharp Fax Machine, ensure the power cord is properly plugged into a power outlet. Also, verify the telephone line is correctly connected to both the TEL. LINE socket and the wall socket. Finally, confirm that the fax machine is set to tone dial.
Why is nothing printing at the receiving end from my Sharp Fax Machine?
If nothing is printed at the receiving end from your Sharp Fax Machine, ensure that the document for transmission is placed face down in the feeder.
What does 'RECALLING' mean on my Sharp UX-53 Fax Machine?
If your Sharp Fax Machine is recalling, it means you attempted to send a fax by automatic dialing, but the line was busy or the receiving fax machine did not answer. The fax machine will automatically reattempt the call.
What does 'LINE BUSY' mean on my Sharp UX-53?
If the Sharp Fax Machine displays 'LINE BUSY', it appears when attempting to send a fax by automatic dialing and the line is busy or the receiving fax machine doesn’t answer. Press the designated key to clear the message.
How to stop Sharp Fax Machine from interrupting voice calls?
If you experience interrupted voice calls on an extension phone due to the fax on your Sharp Fax Machine, especially when the reception mode is set to A.M., press any three keys on the extension phone after answering to prevent interruptions on a tone dial extension phone. Note: Do not enter the code to activate fax reception.
Why is my Sharp UX-53 not receiving when the power is on?
If the Sharp Fax Machine is on but no reception takes place, ensure that the telephone line cord is plugged into the TEL. LINE socket, and not the TEL. SET socket.
Why is my Sharp Fax Machine not transmitting even though the power is on?
If the Sharp Fax Machine is on but no transmission takes place, make sure the receiving machine has paper. Ensure the telephone line cord is plugged into the TEL. LINE socket, not the TEL. SET socket. If the receiving machine is in manual mode without an attendant, reception isn't possible. Check the display for error messages, and pick up the handset to check for a dial tone.
What to do if Sharp UX-53 displays 'DOCUMENT JAMMED'?
If your Sharp Fax Machine displays 'DOCUMENT JAMMED', it means the original document is jammed. Refer to the section on Clearing Paper Jams to clear the jam.
How to troubleshoot 'LINE ERROR' on Sharp UX-53 Fax Machine?
If the Sharp Fax Machine displays 'LINE ERROR', it means that the transmission or reception was not successful. Press the designated key to clear the message and try again. If the error persists, try the transaction again. Check the connection of the cord from the TEL. LINE socket to the wall socket, ensuring it's no longer than two meters. Ensure no modem devices share the same telephone line. Verify the other party's fax machine is functioning correctly. Check your telephone line for noise. Try connecting the fax machine to a different telephone line. If the problem continues, the fax machine may need service.
General| Type | Plain Paper Fax |
|---|---|
| Print Technology | Thermal Transfer |
| Compatibility | G3 |
| Modem Speed | 14.4 Kbps |
| Paper Tray Capacity | 50 sheets |
| Automatic Document Feeder Capacity | 10 sheets |
| Compression | MH, MR, MMR |
| Display | LCD |
| Copier Function | Yes |
| Polling | Yes |
| Answering Machine Interface | Yes |
| Transmission Speed | 6 seconds per page |
| Resolution | 203 x 98 dpi |
| Paper Size | Letter |
To Next Page
