Installing the Print Cartridge
21
1. Installation
Quality mode (using more/less ink)
If you prefer a higher quality image when printing faxes and copies, turn on
Quality mode. If you wish to use less ink or speed up ink drying time, turn off
Quality mode.
♦ Quality mode is initially turned on.
1
Press once and twice.
2
Press once and 3 times.
3
Press once.
4
Press to turn on Quality mode, or
to turn it off.
5
Press to return to the date and time display.
HQ FAX PRINT
The display briefly shows
your selection, then:
QUALITY MODE
1=ON, 2=OFF
Display:
PRINT SET-UP
Note: If at any time the display shows the alternating
messages at right, check the printing paper. If the tray is
empty, add paper. If there is paper in the tray, take it out
and then reinsert it. When you are finished, press
.
START/
MEMORY
ADD PAPER &
PRESS START KEY
To Next Page
Loading...
Need help?
General
