Sending a Fax by Automatic Dialing
40
Sending a Fax by Automatic Dialing
You can store your most frequently dialed fax or phone numbers in the
machine for automatic dialing. Up to 30 numbers can be stored.
♦ Auto-dial numbers are dialed by pressing until the desired number
appears in the display, and then .
Storing fax and phone numbers for automatic dialing
START/
MEMORY
5
When you hear the fax tone, press . Replace the handset.
• Important: Remove the document as soon as it exits the machine.
Otherwise, ink from received faxes and copies may soil the document.
• If the transmission is completed successfully, the machine will beep once.
• If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 72).
Note: If the transmission is unsuccessful and DOCUMENT JAMMED appears
in the display, remove the document as explained on page 89. (This may
occur if the other fax machine doesn’t respond properly when you attempt to
send the document.)
START/
MEMORY
1
Press once and once.
2
Press once.
Display:
ENTER FAX #
<NEW NUMBER>
To Next Page
Loading...
Need help?
General
