Using TEL Mode
53
3. Receiving
Faxes
1
When the machine rings, pick up the
handset.
2
If you hear a fax tone, wait until
the display shows RECEIVING and
then replace the handset.
3
If the other party first speaks with you
and then wants to send a fax, press
after speaking. (Press before
the sender presses their Start key.)
• When RECEIVING appears in the
display, hang up.
START/
MEMORY
Answering with the machine’s handset
Important: If a document is loaded in the machine’s feeder, remove it before
performing the steps below. (Fax reception is not possible when a document
is in the feeder.)
If RECEIVING does not appear (or if you have set the Fax
Signal Receive setting to NO), press to begin reception.
START/
MEMORY
Beep
RECEIVING
RECEIVING
START/
MEMORY
To Next Page
Loading...
