Sharp XV-Z12000 User Manual

Basic Operation
-37
MENU
button
", ', \, |
buttons
STANDBY
button
ENTER button
Turning the Power off
1 Press on the remote control
or
on the projector, then
press
or again while the
confirmation message is dis-
played, to put the projector into
the standby mode.
Note
• If you accidentally pressed and
do not want to put the projector into
the standby mode, wait until the
confirmation message disappears.
2 Unplug the power cord from the
AC outlet after the cooling fan
stops.
Info
• Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due
to the rise in internal temperature,
as the cooling fan also stops.
• When connected to equipment such
as an amplifier, be sure to turn off
the power to the equipment con-
nected first and then to the projec-
tor.
XV_Z12000_E_US_p33_41.p65 03.9.24, 2:00 PM37

Sharp XV-Z12000 Specifications

General

Brand	Sharp
Model	XV-Z12000
Category	Projector
Language	English